BROTHER OPEN TOE FREE MOTION METAL QUILTING FOOT for 5mm & 7mm low shank models

The Brother Open Toe Quilting Foot is designed for 5mm and 7mm low shank models. With its large open-toe design, you have greater visibility and easier access to the needle area for free-motion, outline quilting, and other projects. Enjoy greater accuracy with this quilting foot.

1. Screw on the Open Toe Quilting Foot, with the pin over the needle clamp screw.
2. Lower the feed dogs.
3. Use the foot controller so that both hands are free to guide the fabric.
4. Select a straight stitch or your preferred stitch such as zigzag stitch.
5. Set the fabric under the presser foot.
6. While starting to sew, press the needle position button twice to pull the bobbin thread to the quilt top.
7. Gently holding the upper and bobbin threads sew about four locking stitches.
8. Guide the fabric with both hands while keeping the fabric pulled tight.
9. When quilting is finished, sew about four locking stitches and finish the thread ends.